View OPT-1250B1F1RB_761532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

OPT-1250xxxx Series RoHS Compliant 1X9 SC Duplex Receptacle Transceiver Module for Gigabit Ethernet
Features
Industry Standard 1 x 9 Footprint and duplex SC Connector interface Compliant with Specifications for IEEE 802.3z Gigabit Ethernet OPT-1250Bxxx compliant with the 1.0625GBd Fibre Channel 100-SM-LC-L FC-PI Rev.13 OPT-1250Axxx compliant with the 1.0625GBd Fibre Channel FC-PI 100-M5-SN-I Rev.13 Single +3.3V or 5V Power Supply PECL or TTL Receiver Signal Detect Indicator Wave Solderable and Aqueous Washable Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2
Description
The OPT-1250xxxx series from DELTA is a 1X9 transceiver module designed expressly for high-speed communication applications that require rates of up to 1.25Gbit/sec. It is compliant with the Gigabit Ethernet standards as well as 1x Fiber channel standards. The OPT-1250xxxx transceivers are provided with the SC receptacle that is compatible with the industry standard SC connector. The post-amplifier of the OPT-1250xxxx also includes a Signal Detect circuit that provides a PECL or TTL logic-Low output when an unusable optical signal level is detected. (see order information) The OPT-1250xxxx transceiver is a Class 1 eye safety product. The optical power levels, under normal operation, are at eye safe level.
Applications
Gigabit Ethernet/Fast Ethernet Switched backplane applications
Performance
OPT-1250AxFxx:
850nm VCSEL, up to 500m in 50/125 m MMF 850nm VCSEL, up to 220m in 62.5/125 m MMF
OPT-1250B2I1x:
1310nm FP laser, Data Link up to 5km in 9/125um SMF
OPT-1250BxQxx:
1310nm FP laser, Data Link up to 10km in 9/125um SMF 1310nm FP laser, up to 550m in 50/125 m MMF 1310nm FP laser, up to 550m in 62.5/125 m MMF
1
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Absolute Maximum Ratings
Parameter Storage Temperature Lead Soldering Temperature Lead Soldering Time Supply Voltage Symbol Ts TSOLD tSOLD VCC Min. -40 Typ. Max. 85 260 10 6 Unit C C sec. V Note
0
Recommended Operating Conditions
Parameter Ambient Operating Temperature Supply Voltage OPT-1250x1xx OPT-1250x2xx, OPT-1250x4xx Note: See ordering information for detail Symbol TA VCC Min. 0 4.75 3.135 Typ. Max. 70 5.25 3.465 Unit C V Note 1
Electrical Characteristics
(At recommended ambient operating temperature, TA and supply voltage, VCC) Parameter Total Supply Current Transmitter Transmitter Data Input Voltage-Low Transmitter Data Input Voltage-High Transmitter Differential Input Voltage Receiver Data Output Voltage-Low Data Output Voltage-High Receiver Differential Output Voltage Output Data Rise/Fall Time PECL SD Output LOW level output voltage HIGH level output voltage TTL SD Output LOW level output voltage HIGH level output voltage Symbol ICCT VIL-VCC VIH-VCC VDT VOL-VCC VOH-VCC VDR tr/tf VSDH-VCC VSDL-VCC VSDH VSDL Min. Typ. Max. 300 -1.475 -0.880 1.6 -1.62 -0.74 1.2 0.4 -1.60 -0.9 VCC 0.8 Unit mA V V V V V V ns V Note
-1.810 -1.165 0.3 -1.95 -1.045 0.5
1 1 2 1 1 2 3 4
0.7
-1.84 -1.1 2 0
V
5
Notes: 1. For OPT-1250A1F1x, OPT-1250A4F1x, OPT-1250B2I1x, OPT-1250B2Q1x and OPT-1250B1Q1x. 2. For OPT-1250A2F2x and OPT-1250B4Q2x. 3. These are 20%~80% values 4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250B2I1x, OPT-1250B1Q1x and OPT-1250B2Q1x 5. For OPT-1250A4F1x and OPT-1250B4Q2x
2
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Single Mode Transceiver (OPT-1250B2I1x, OPT-1250B1Q1x, OPT-1250B2Q1x,
OPT-1250B4Q2x) (At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 9/125um SMF) Parameter Transmitter Output Optical Power (Avg.) OPT-1250BxIx OPT-1250BxQx Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye Receiver Sensitivity (Avg.) Input Optical Wavelength Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver saturation power Notes: 6. These are 20%~80% values 7. The sensitivity is provided at a BER of 1x10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. PIN 1310 PA PD PA-PD PSAT -19 -35 0.5 -3 -19 dBm nm dBm dBm dB dBm 2 PO ER -12 -9.5 9 1270 -3 -3 dBm Symbol Min. Typ. Max. Unit Note
dB 1310 1355 nm C 2.8 nm 0.26 ns 1 tr/tf RIN -120 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety
Mask of the eye diagram for the optical transmit signal
3
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x)
(At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec, PRBS=27-1 NRZ, 62.5/125um MMF) Parameter Transmitter Output Optical Power (Avg.) Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Rise/Fall time Relative Intensity Noise Output Eye Receiver Sensitivity (Avg.) Input Optical Wavelength Signal Detect-Asserted (Avg.) Signal Detect-De-asserted (Avg.) Signal Detect-Hysteresis Receiver saturation power Notes: 8. These are 20%~80% values 9. The sensitivity is provided at a BER of 1x10-10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. PIN 850 PA PD PA-PD PSAT -17 -30 0.5 -4 -17 dBm nm dBm dBm dB dBm 2 dBm dB 850 860 nm C 0.85 nm 0.26 ns 1 tr/tf RIN -117 dB/Hz Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety PO ER -9.5 9 830 -4 Symbol Min. Typ. Max. Unit Note
Mask of the eye diagram for the optical transmit signal
4
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Pin Out Table
PIN 1 2 3 4 5 6 7 8 9 Symbol GND RD (+) RD (-) SD VccR VccT TD (-) TD (+) GND Functional description Receiver Signal Ground Receiver Data Out (LVPECL) Receiver Data Out Bar (LVPECL) Receiver Signal Detect (LVPECL or TTL) Receiver Power Supply, Transmitter Power Supply Transmitter Data In Bar (LVPECL) Transmitter Data In (LVPECL) Transmitter Signal Ground
Pin Descriptions:
Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out (LVPECL), RD (+) Receiver Data output (LVPECL), RD (+). Pin 3 Receiver Data Out Bar (LVPECL), RD (-) Receiver Data output (LVPECL), RD (-). Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic "1" Output Fault Condition: Logic"0" Output. Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Bar (LVPECL), TD (-) Transmitter Data Input (LVPECL), TD (-) Pin 8 Transmitter Data In (LVPECL), TD (+) Transmitter Data Input (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane.
5
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Recommend Circuit Schematic for Internal DC Coupled Transceivers
TX-VCC
9 R1 C1 C2 R3
8
7
6
5
4
3
2
1
TD+ TD-
TX-GND
RX-GND
C3
RD+ RDSD
C4 TX-VCC RX-VCC R2 R4 R5 R6 R7
Transceiver Top Niew
R1=R3=82 Ohm (3.3V), 68 Ohm (5V) R2=R4=130 Ohm (3.3V), 191 Ohm (5V) R5=270 Ohm (3.3V, PECL), 510 Ohm (5V, PECL) NC (TTL) R6=R7=274 Ohm (5V) C1=C2=C3=C4=C6=C8=100 nF C5=100 uF C7=C9=10 uF L1=L2=1 uH or ferrite inductor
Test Equipment
L1 TX-VCC VCC C5 C6 C7
L2 RX-VCC C8 C9
Recommend Circuit Schematic for Internal AC Coupled Transceivers
9 8 7 6 5 4 3 2 1
TD+ TD-
C1 C2 TX-VCC RX-VCC R1
C3 C4
RD+ RDSD
Transceiver Top View
Test Equipment
L1 TX-VCC VCC C5 C6 C7
R1=270 Ohm(3.3V, PECL), 510 Ohm (5V, PECL) NC(TTL) C1=C2=C3=C4=C6=C8=100 nF C5=100 uF C7=C9=10 uF L1=L2=1 uH or ferrite inductor
L2 RX-VCC C8 C9
6
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Package Outline Drawing (without shielding)
Package Outline Drawing (A type shielding)
7
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Package Outline Drawing (B type shielding)
Package Outline Drawing (C type shielding)
8
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Regulatory Compliance
Feature Electromagnetic Interference (EMI) Radio Frequency Electromagnetic Field Electrostatic Discharge to the Duplex LC Receptacle FCC Class B EN 55022 Class B (CISPR 22A) EN 61000-4-3 IEC 1000-4-3 EN 61000-4-2 IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins Eye Safety MIL-STD-883E Method 3015.7 US FDA CDRH AEL Class 1 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 Component Recognition CDRH File # 0321539-00 TUV Certificate No. R50032471 (1) Satisfied with electrical characteristics of product spec. (2) No physical damage Reference Performance
Underwriters Laboratories and UL File # E239394 Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment
9
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Ordering information
OPT- 1250X1X2X3X4X5X6X7 X1: Fiber A: Multi-mode 850nm B: Single-mode 1310nm X2: Power Supply Voltage and SD Level 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level 4: 3.3V, TTL SD Level X6: X5: RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant Shielding Type Blank: Plastic housing A: A type shielding B: B type shielding C: C type shielding
X3: Distance F: 500m, 50/125 m MMF I: 5km, 9/125 m SMF Q: 10km, 9/125 m SMF X4: Data Coupling 1: 1x9SC DC/DC 2: 1x9SC AC/AC
X7:
Temperature Blank: 0 to +70 degree C H: -10 to + 85 degree C
10
DELTA ELECTRONICS, INC.
Sep., 2006 Rev. 0G
www.deltaww.com

▲Up To Search▲

Price & Availability of OPT-1250B1F1RB

	To Download OPT-1250B1F1RB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .